BPI OLED Display Module

BPI OLED Display Module

13th June 2019 0 By Tanna Techbiz LLP

Description :

Banana Pi 0.96’ OLED display module is designed by 52pi which is made by 128×64 yellow and blue OLED pixels , diagonal is only 0.96 inch . The controller is SSD1306, communicates via 4-wire SPI, the display have its own backlight, no backlight LED is required ,This reduces the power required to run the OLED and is why the display has such high contrast , extremely wide viewing angle and extremely operating temperature

Banana Pi OLED

Product specifications

1. Ultra low power supply
2. Maximum current 100uA
3. Keep up current 12.25uA
4. Hardware keep up display
5. 3.3V work voltage ,([MIN 1.6V] ,[MAX:3.6V])
6. Internal DC/DC voltage converter
7. SPI driver support , AT 64MHz[TYP] 125MHZ[OB]
8. FP frequency: 64fps[TYP] 368fps[OB] 

Method Of Use :

Directly connect with banana pi

Step of Test:

Step 1. get WiringPi from github:
git clone https://github.com/BPI-SINOVOIP/BPI-WiringPi2.git
Step 2. install WiringPi:
cd BPI-WiringPi
chmod +x ./build
sudo ./build
Step 3. Run the OLED Project:
chmod +x bpi_test
cd bpi_test
sudo ./52pi

There are show time and date to start in terminal and enjoy the games.
sudo ./hello